PP Pleated Filter Cartridge
PP pleated filter cartridge is made of pleated polypropylene membrane, polypropylene non-woven fabrics and polypropylene cage. During the production, it is purity, free of surfactants, resins, binders and adhesives. It can be used for the liquid and gas prefiltration and clarification.
● Features and Benefits
100% high quality polypropylene material;
Wide chemical compatibility
High flow rate
Low differential pressure
High dirt holding capacity
High nominal filtration precision
Long using life
Economical choice for the prefiltration and guard filtration before critical filtration
Board range of micron ratings
Suitable for various filtration.
Meet the current FDA after cleaned and flushed with Pyrogen-free water.
● Micron Rating（µm）:
0.10 0.20 0.45 1.00 3.00 5.00 10.0 20.0 40.0 50.0 100
● Typical Applications
1. Pharmaceuticals, APIs, Biologics; Solvent; Compressed air filtration;
2. Plating solutions, Ink;
3. Fine Chemicals;
4. Food & Beverages, Wine, Beer, Mineral Water;
5. Semi-Conductor, LCD Display, Discs, R.O. prefiltration
6. Clarification of waste water treatment.
● Materials of Construction
Filter Media: Polypropylene
Support Layer: Polypropylene
Inner Core: Polypropylene
Outer Core: Polypropylene
●Cartridge Dimensions
Outer Diameter: 68mm
Inner Diameter: 33mm
Effective Filtration Area: ≥0.60m2
●Operation Conditions
Normal Operating Temperature: ≤55℃
Max. Operating Temperature: 80℃(△P≤0.10Mpa)
Max. Differential Pressure: Normal Flow direction：4.2 bar at 25℃
Reverse Flow direction: 2.1 bar at 25℃
Steam Sterilization for 30 minutes at 121±2℃
PH Value compatibility: 1-13
●Cartridge Safety
Endotoxin: ＜0.25 EU/ml
Extractable: 0.03g/10”
